There has been some confusion about how to measure the windows. My apologies, I should have included this information in the original post. We need 3 bits of information for each window. 1. Overall window assembly size 2. Location in house 3. Type of window – casement single, casement double, casement triple, non-operating/picture. Only buildings Q-T are spec’d for hung windows on the front and side and those are hung doubles and hung triples. If your home is not in building Q-T and your windows are hung instead of casement, then you have replacement windows that do not conform to architectural specs and should be replaced to match the appearance of all the other casement style windows in the building.
Windows should be measured from the inside of the outermost casement frame/moulding on one side to the inside of the outermost casement frame/moulding on the opposite side. Please note the location of each window as if you were facing the house from the outside – as in Front/Downstairs/Left or Back/Upstairs/MIddle. Also please note whether the window is a single, double, or non-opening. Attached are photos of each of the three types with arrows representing the measurement needed. If you have a triple window, measure it the same way shown in the double.
Happy Holidays to All.
Windows should be measured from the inside of the outermost casement frame/moulding on one side to the inside of the outermost casement frame/moulding on the opposite side. Please note the location of each window as if you were facing the house from the outside – as in Front/Downstairs/Left or Back/Upstairs/MIddle. Also please note whether the window is a single, double, or non-opening. Attached are photos of each of the three types with arrows representing the measurement needed. If you have a triple window, measure it the same way shown in the double.
Happy Holidays to All.